Measurement tools are used to verify that a part’s dimensions conform to required tolerances. They include calipers, micrometers, gages, CMMs and profilometers.
How to Calibrate Gages and Certify Calibration Programs
Tips for establishing and maintaining a regular gage calibration program.
Measurement: Essential Reading
How to Choose the Correct Measuring Tool for Any Application
There are many options to choose from when deciding on a dimensional measurement tool. Consider these application-based factors when selecting a measurement solution.
A Case for Combining Workholding with Optical Scanning
Automotive dies and die inserts are often complex, one-off parts with little room for error. Integrity Tool's investments in modular workholding tools and 3D optical scanning have allowed the company to create niche capabilities for its CNC machined parts.
How to Choose the Right Cut Off When Measuring Roughness
Measurement results for surface finishing parameters can vary depending on the filter parameter (Lc), also known as the cutoff.
Understanding Errors In Hand-Held Measuring Instruments
Different instruments (and different operators) are prone to different errors.
How To Calibrate Your Calipers
If you’re interested in calibrating your own digital, dial or Vernier calipers, here are some steps to take to make sure it goes off without a hitch.
FAQ: Measurement
What is a caliper?
Calipers, which can be Vernier, dial or digital, are versatile tools for basic length measurement. They can be used on the shop floor, in the inspection room or even in the home by hobbyists.
Source: Caliper Tips And Tricks
What is a micrometer?
A micrometer consists of two opposing surfaces, a stationary anvil and a moveable spindle. On most micrometers, these hardened steel or carbide-tipped contact surfaces are flat. However, micrometers can also be equipped with contact tips with unique forms for measuring special part characteristics.
Convenience is one of the reasons the micrometer is often the tool of choice for length/diameter measurements. The basic micrometer provides direct size information quickly, has high resolution and is easily adaptable to many different measurement applications.
Source: How to choose a micrometer that fits your needs
What is a gauge?
Gages are indirect reading instruments. The measurement units live not on the scale but off-site (for example, in a calibration room), and a master or other standard object acts as their substitute. The workpiece is compared against the master and only indirectly against the measurement units. The gage thus evaluates not the dimension itself, but the difference between the mastered dimension and the workpiece dimension. Examples of these comparative gages include an adjustable bore gage, mechanical snap gages or bench stands with dial indicators.
Gages tend to be faster and more accurate than measuring instruments. This is because they are dedicated to a particular size, and over their short range, they produce higher resolution and hence, greater accuracy.
Source: When Gaging Becomes Measuring That Becomes Gaging
What does CMM mean?
A coordinate measuring machine (CMM) is a measurement tool that consists of a motion system, a probing system, a computer and measurement software.
Source: Machining 101: What Are Coordinate Measuring Machines?
Measurement Suppliers
Narrow by Measurement Category
Process Control — Leveraging Machine Shop Connectivity in Real Time
Renishaw Central, the company’s new end-to-end process control software, offers a new methodology for producing families of parts through actionable data.
How to Choose the Correct Fixed-Body Plug Gaging Solution
The two types of fixed-body plug gages are both accurate, fast and easy to use. Consider these factors when selecting one for your gaging application.
#Basics #qualitygagingtips
Electronic Bore Gage Automates Bore Data Acquisition
This new portable gage provides precision measurement and verification of custom parts with integrated data collection.
The Link Between CNC Process Control and Powertrain Warranties
Ever since inventing the touch-trigger probe in 1972, Sir David McMurtry and his company Renishaw have been focused on achieving process control over its own manufacturing operations. That journey has had sweeping consequences for manufacturing at large.
#thesetup
Verisurf 2024 Features New Productivity Workflows, Device Compatibility
The latest update to the Verisurf software is designed to enhance users’ efficiency, quality and throughput.
Rethink Quality Control to Increase Productivity, Decrease Scrap
Verifying parts is essential to documenting quality, and there are a few best practices that can make the quality control process more efficient.
#Basics #viewfrommyshop
Nikon Metrology Acquires Avonix Imaging
The companies will further advance the development of new products, especially in the automotive and aerospace industries.